DJSF1352-D600 DC Meter with Built-in Shunt
DJSF1352-D600 DC Meter with Built-in Shunt
● Measurement: Bi-directional DC Energy (kWh), Power, Current, Voltage and etc
● Rated Voltage: 0~1000Vdc (direct connect)
● Rated Current: 300A or 600A DC
● Communication: RS485 (MODBUS-RTU)
● Certification: CE MID
-
476 AMC200(L) DC energy meter.pdf
-
DJSF1352-D-600 MID证书(1)(4).pdf
Acrel DJSF1352-D600 is a MID certified DIN rail DC energy meter with built-in integrated shunt, supporting direct 600A and 0–1000VDC measurement. It measures bidirectional active energy for charging and discharging with Class 1 accuracy. Equipped with RS485 Modbus communication, pulse output and wide auxiliary DC power supply. No external shunt needed, simplifying wiring and installation. Widely used in EV fast chargers, battery energy storage and photovoltaic systems. It has CE and MID certifications for reliable billing metering globally.
Wiring & Terminal
Dimension
Wiring
Typical Connection
|
Distribution System |
DC |
|
|
Bus voltage |
Rated voltage |
48VDC,240VDC,336VDC
|
|
Measuring range |
±20% |
|
|
Overload |
Instantaneous voltage 2 times per second
|
|
|
Current incoming circuit |
Rated |
5V (Hall sensor, need external power supply ±12V or ±15V)
|
|
Overload |
Duration is 1.2 times, instantaneous 10 times/second
|
|
|
Environment
|
Altitude
|
≤2500m
|
|
Temperature |
Operation：-15℃～55℃ Storage：-25℃～70℃
|
|
|
Humidity |
Relative humidity≤93%
|
|
|
Installation
|
Method DIN35mm rail or bottom plate installation
|
|
|
Auxiliary power supply |
Powered by AMC100-ZD; DC 12-24V power supply when used alone
|
|
|
Insulation resistance |
The insulation resistance between all terminals and the conductive parts on the shell must be at least 100MΩ
|
|
|
Communication |
RS485/Modbus-RTU
|
|
|
Protection level
|
IP20 |
|
