Intelligent Communication Gateway
An embedded-Linux, IoT-ready data gateway that collects energy data from water, electricity, gas, oil, cooling and heating meters — then uploads it to your platform via 4G LTE, Ethernet or WiFi with Modbus-TCP and MQTT.
The ANet-1E2SM series is a general-purpose intelligent communication gateway independently developed by Acrel, based on an embedded Linux platform and specifically designed for IoT applications. It meets the data acquisition needs of sub-metering for water, electricity, gas, oil, cooling and heating energy consumption.
Featuring a highly integrated ARM chip, the gateway delivers high performance, low power consumption, real-time data acquisition and convenient device management. It is widely deployed in building energy systems, power monitoring, demand-side management, comprehensive energy platforms and the ubiquitous power IoT.
• DL/T645-97/07
• DL/T698
• CJT188-2004
• MQTT protocol
• Multi-platform upload with
different protocols
secondary calc, logic control)
• All Acrel meters (ACR, PZ, AMC,
APM, ADW, AEW, DTSD)
• 3rd-party device integration
Recommended cables: RS485 — RVSP 2×1.5mm² · Ethernet — Cat6 · Power — 2-core 22AWG paired with 100-240Vac to 12Vdc adapter (included in each pack).
Get datasheets, quotations and configuration support for the ANet-1E2SM series. Our specialist responds within 24 hours.
Type your message below and send it directly via WhatsApp.
|
Parameter |
AF-GSM300-HW868 |
|
Working frequency band |
LTE-FDD B1 B3 B5 B8 |
|
Transmission rate |
LTE-FDD maximum download rate is 150Mbps, maximum upload rate is 50Mbps |
|
Download |
LORA and RS485 communication (with AEW100) |
|
Upload |
MQTT protocol and 4G communication |
|
SIM card voltage |
3V, 1.8V |
|
Antenna interface |
50Ω/SMA |
|
Serial port |
RS-485 |
|
Baud rate |
9600bps |
|
Operating voltage |
DC12V |
|
Operating current |
350 ~ 400mA @ 12V (400mA when dialing) |
|
Operating temperature |
-40℃~85℃ |
|
Storage temperature |
-40℃~90℃ |
|
Humidity range |
0 ~ 95%, non-condensing |
|
Installation method |
Base plate installation,35mm standard rail mounting |
|
Dimensions |
9.6cm×6.7cm×2.4cm |

