Acrel AMC16-DETT Multi-Circuits DC Energy Meter for Mobile Base & Tower Station
Acrel AMC16-DETT Multi-Circuits DC Energy Meter for Mobile Base & Tower Station
●DC rated voltage: 1 channel: -48VDC
●Rated Input Current:6 Channels:0~5VDC(with Hall sensor)
●Accuracy:1%In≤I≤10%In error±2.5%; I>10%In error±2%
●RS485(MODBUS-RTU)
●DIN Rail 35 mm
- WhatsApp: 8613482177205
- Skype: Charles@acrel
- E-mail: Charles@acrel.cn
-
AMC16-DETT manual.pdf
Base station DC energy meter AMC16-DETT is specially designed for base stations. The meter could measure 6 circuits DC energy, and provide the power supply for the matched hall sensors. Meanwhile, it can realize zero drift calibration by upper computer software.It also has the functions of telemetering,teleindication,teleadjusting, metering at real time, energy quality abnormal alarm, data storage and processing, data interaction. This meter can measure DC power consumption of three operators, providing detail datas for base station.
Characteristic
Communication
Single Channel RS485 communication protocol standard or customized
Display
LED indicator display
Rated U and I
Total 200A/5V
Function
Appearance
Dimension
Wiring
Application in base station
Recommended Products
ADL3000-E
AHKC-EKA
AMC16Z-FAK48
|
Technical parameter |
Index |
|
|
input
|
DC rated voltage |
1 channel: -48VDC |
|
DC current |
6 channels hall sensors output is 5V,current ratio can be set according to the actual ratio |
|
|
Commercial power
monitoring
|
1 channel transmitter input: 0-5VDC or 4-20mA |
|
|
Overload capacity
|
Voltage:1.2times continued,2 times continued 1s;
Current: 1.2 times continued,10 times continued 1s.
|
|
|
Accuracy (superposition hall sensors) |
1%In≤I≤10%In accuracy ±2.5%; I>10%In accuracy ±2% |
|
|
Measurement resolution
|
Voltage output accuracy 0.01V; current output accuracy 0.01A;
power output accuracy 0.01kw; energy output accuracy 0.01kWh.
|
|
|
Functions
|
Basic function
|
Monitor device system time, total voltage, output total current, power, energy, each channel voltage, current, power, energy; LED indicator display;485 communication. |
|
|
Start current: under rated voltage, when the load current value of the meter doesn’t exceed 1% of the max. current, the meter starts.
Shunt running current: when there is no current in the current circuit of the meter, and 85%-125%of the rated voltage is applied on the voltage circuit, the calculator shall not have more than one digital change.
|
|
|
Alarm function
|
DC voltage output low alarm,DC voltage output high alarm,one power down alarm, module voltage loss alarm, metering branch error alarm, internal program error alarm, clock error alarm,memory failure alarm, AC input power failure alarm |
|
|
Timing function
|
support broadcast timing, could remote timing to the meter through RS485 communication. |
|
|
Communication
|
Single channel RS485, baudrate 9600bps, can be set to 1200BPS, 2400bps, 4800bps.
Communication protocol: standard or custmized
|
|
