Medical IT isolated power supply system is suitable for hospital operating room, ICU (CCU) and other important places, and can provide a safe place for such continuous, reliable power solutions.
The medical isolation power monitoring system is used to centrally monitor the operation status of the medical IT system in all medical class 2 places in the medical building.
This centralized monitoring system can be set up in the duty room of the electrical operation and maintenance personnel of the hospital, or can be integrated into other power monitoring systems and monitored by professional electrical personnel.
Once a certain II system fails, the electrical maintenance personnel can Make a judgment within a short time and deal with it according to the situation on the spot.
Main Interface
Display the insulation status, load status, and the isolation transformer temperature of each set of isolated power systems in graph form.
Model(Cabinet) |
GGF-I6X (Without Locating) |
GGF-I8X
(Without Locating) |
GGF-I6XL
(With Locating) |
GGF-I8XL
(With Locating) |
Isolation Transformer |
AITR6300S (6.3kVA) |
AITR8000S (8kVA) |
AITR6300S (6.3kVA) |
AITR8000S (8kVA) |
Insulation monitors |
AIM-M100(or AIM-M10) |
AIM-M200 |
||
DC power supply |
ACLP10-24 |
HDR-60-24 |
||
Test signal generator |
—— |
ASG150 |
||
Insulation fault locator |
—— |
AIL150-4 |
||
Output circuit |
IT Systems: 4, 8, etc. (can be customized according to the actual needs) |
|||
Current Transformer |
AKH-0.66P26 |
|||
Breaker |
iC60LMA 16A 2P、iC60LMA 40A 2P |
|||
Alarm and display instrument |
AID 150 (single set or multiple sets of centralized monitoring) |