Introduction
ADL100-ET single phase electric meter is designed for singlephase active energy measurement on low voltage system.The meter meetthe related technical requirements of electronic power meter in theIEC62053-21、IEC62053-22 standards.
ADL100-ET Single Phase Din Rail Energy Meter
ADL100-ET Single Phase Din Rail Energy Meter
● AC 220V
● 10（60）A
● RS485，MODBUS-RTU
● LCD display
● kWh Class 1，Kvarh Class 2
● U、I、P、Q、S、PF、kWh、kvarh
● DIN 35mm
-
Manual.pdf
Characteristics
- Rated Voltage: AC220V
- Rated Current: 10（60）A，20（100）A
- Communication: RS485(MODBUS-RTU)
- Set parameters
- Display: 8 digits LCD display U, I, P, Q, PF, kWh, Power measure (999999.99kWh)
- Accuracy: kWh Class 1
- Installation: DIN 35 mm
- Frequency: 50HZ
- Auxiliary power supply(self supply): 220Vac,Range:154~264Vac
- Dimension(L*W*H)：36*88*70 mm
- Clock: ≤0.5s/d
- Starting current: 0.004Ib
Application
Recommended Products
ADL3000-E
ADL100-EYRF
ADL300-EY
|
Input voltage |
Rated voltage |
AC 220V |
|
|
Reference frequency |
50Hz |
||
|
Power consumption |
<10VA |
||
|
Input current |
Basic current |
10A,20A |
|
|
Maximum current |
60A,100A |
||
|
Starting current |
4‰Ib |
||
|
Consumption |
<4VA |
||
|
Measurement performance |
Accuracy of measuring |
kWh Class 1 |
|
|
Range of measuring |
000000.00~999999.99kWh |
||
|
Clock accuracy |
≤0.5s/d |
||
|
Active pulse |
Pulse width |
80±20ms |
|
|
Pulse constant |
1600imp/kWh |
||
|
Communication |
Interface |
RS485(A+、B-) |
|
|
Connection mode |
Shielded twisted pair conductors |
||
|
Protocol |
MOD BUS- RTU |
||
|
Dimensions (Length × Width × Height) |
88mm×36mm×70mm |
||
|
Temperature |
Work temperature |
-25℃~55℃ |
|
|
Storage Temperature |
-40℃~70℃ |
||
|
Relative humidity |
≤95%(No condensation) |
||
|
Altitude |
<2000m |
||
