02 Mar 2021

Substation,building,telecommunication base station,industrial energy consumption,intelligent lighthouse,operation and maintenance of power.
Alarm Analysis
2)Energy situation
3)Details of electrical parameters
4)Equipment status
  • 1) AF-GSM500-4G Gateway

    ● 1. Meter reading by LoRa or RS485
    ● 2. Uplink Communication:4G or Ethernet
    ● 3. Protocol: Modbus-TCP,MQTT,etc,protocol can be customized
    ● 4. Support breakpoint transmission,local data storage,local display and button setting.
  • 2) Anet-1E2S1-4G Gateway

    ● 1. Downlink:2* RS485
    ● 2. Uplink:4G
  • 3) AF-GSM300-HW868 Smart Gateway

    ● Support data acquisition of the serial port MODBUS RTU protocol.
    ● Support for data acquisition of up to 30 MODBUS RTU devices.
    ● Support the acquisition of 5 register address fields for each MODBUS device.
    ● Support triggering alarms by presetting alarm addresses and alarm values for each MODBUS address range.
    ● Support server MODBUS or LORA unvarnished transmission communication.
    ● Support to connect the data center by fixed IP and dynamic domain name resolution.
  • 4) AWT100-4GHW Gateway

    ● Downlink: RS485
    ● Uplink:4G, WiFi or Ethernet
  • 5) AEW100 Wireless Energy Meter

    ● RS485 and Infrared communication
    ● Lora communication on 470MHz
    ● Rated I:
    1.5(6)A,20(100)A,40(200)A,80(400)A,120(600)A ● Rated U: 3×220/380V,3*380V,3*57.7/100V
    ● kWh Class 1
    ● DIN 35 mm
  • 6) ADW210 IOT meter

    ● Measurement: 4 circuits 3 phase voltage,current,power,power factor ,etc.
    ● Max demand
    ● Communication:RS485 or LoRa
  • 7) ADW300 wireless meter

    ● Measurement:3 Phase voltage,current,power,power factor,etc.
    ● Communication:RS485,LoRa,4G,NB or 2G
    ● Max demand
    ● Accuracy:Class 1
  • 8) APM830 Multifunction Meter

    ● 1. Measurement:current,voltage,energy,SOE,etc.
    ● 2. DI/DO,AI/AO,TF card,etc.
    ● 3. Communication:2*RS485,Ethernet and Profibus-DP
  • 9) AMC96L-E4/KC Multifunction Meter

    ● True RMS Measurements
    ● THD with 2-31st Harmonics
    ● Max/Min Log with Timestamp
    ● Internal Optional 4DI&2DO or 2DI&2DO&2AO
    ● Standard one Energy Pulse Output
  • 10) ADL100-ET Single Phase Multi-function Energy Meter

    ● AC220V
    ● 10(60)A,20(100)A
    ● RS485(MODBUS-RTU)
    ● Set parameters
    ● LCD display
    ● kWh Class 1
    ● DIN 35 mm
  • 11) AKH-0.66/K series current transformer General

    Current Transformer (CT) is used to transform the high AC current to small easily manageable values. They are connected with the panel meter or relay and they can help to measure the current or protect the equipment.
    Standards
    IEC/EN61869-1, IEC/EN61869-2
  • 12) AKH-0.66/I series current transformer General

    Current Transformer (CT) is used to transform the high AC current to small easily manageable values. They are connected with the panel meter or relay and they can help to measure the current or protect the equipment.
    Standards
    IEC/EN61869-1, IEC/EN61869-2
Solutions
Product Catalog